[Tutorial] Hellcat's CFW Recovery Flasher (1.32)

[RainMotorsports]

Introduction
What is it and what can it do? Straight up Hellcat's Recovery Flasher (1.32) can do the following:

- Reflash 3.71/4.01 M33 from the M33 Recovery Menu or Time Machine
- Take 1.50/SE/OE/M33/GEN firmwares straight to 3.71 M33 or 4.01 M33
- Make/Restore flash0, flash1 and PSN Activation Backups.

- Launch other programs from itself (Such as nandtool!)



Installing Hellcat's Recovery Flasher
First Download from HERE - or check the Release Thread for Updates
On Custom Firmware - Place the RECOVERY folder from the download into ms0:/PSP/GAME/
-or-
On 1.50 - Copy both folders from inside the 1.50 folder contained within the download to ms0:/PSP/GAME/
Then download the 3.71 or 4.01 Update and copy to the root of the memory stick renamed as 371.PBP or 401.PBP (You may already have one of these from your DCv3 or DCv6/7 pandora setup. You can just keep that on there then.)
NOTES: Never run the recovery version outside of the folder specified or it will fail (Additionally there is an elf menu version for those of you wanting it on your pandora stick).

Using Hellcat's Recovery Flasher
1.50, SE, OE requires the program be started from the XMB otherwise on M33 or GEN you can run it from Recovery or XMB.
1 - You will be greeted by the warning screen read it and select one of the I Agree statements.
2 - Make your selection between 3.71 and 4.01 and click on it.
3 - Choose between reset settings or not though i would recommend the reset.
4 - Wait for it to complete and enjoy!
NOTES: If your power light is flashing just wait this is normal!

Optionally Making and Restoring flash0/1 Backups
Flash0/1 (NAND File) Backups can be made from the "Backup Flash content" menu, if one exists you can overwrite it or create a new backup.
Restoring the backup will require the EBOOT.PBP update from the same firmware renamed appropriately (ex. 401.PBP) (NOTE: In the case of 3.60 M33 use the 352.PBP) and placed on the root of the memory stick.
Select Flash/Restore complete FW from backup and chooser the backup you wish to flash and click on Let's go.

NOTES
- I do apologize for not being able to provide screen shots for individual menu's on this one. I tried all the usual plugins and I believe they are being blocked for the safety of the flasher program itself.
- Any operations that flash files to a PSP come with a risk. I nor the author of the program are responsible for anything that happens. Hellcat provides you with plenty of warnings and I would take them seriously.

[Justfilwt]

Nice.. good job... =)
:mrgreenthumbsup:

[Gerät]

Yeap! Thnx 4 this one man!
^^

[flash670]

hey how do i run this frum recovery mode? where do i go?

[RainMotorsports]

Originally Posted by flash670

hey how do i run this frum recovery mode? where do i go?

Recovery Mode
"Run program at /PSP/GAME/RECOVERY/EBOOT.PBP"

[flash670]

nothing happens. my screen is black.
does this works if your psp is bricked? but has recovery mode.

[RainMotorsports]

Originally Posted by flash670

nothing happens. my screen is black.
does this works if your psp is bricked? but has recovery mode.

It can, make sure you have the files in the right location. But if files are missing that are required to run an actual program on the psp then id imagine your screwed. Not sure I have only tried it from recovery on a psp that was working.

[flash670]

ohh ok. i'll check it again and get back to you

[flash670]

allright, i tried it on my slim and it works in recovery mode. but it doesnt work in my fat which is bricked.
so i guess this dont work on bricked psps.?

[RainMotorsports]

Originally Posted by flash670

allright, i tried it on my slim and it works in recovery mode. but it doesnt work in my fat which is bricked.
so i guess this dont work on bricked psps.?

It "can" thats the purpose of the recovery launch. But it depends on the brick.