(TUTORIAL)HOW TO REPLACE PSP'S ANALOG Stick

[Alankellyeire]

How To Replace PSP Analog Stick

THIS MAY VOID YOUR WARRANTY
IF U HAVE A BROKEN OR DAMAGED ANALOG STICK THIS IS WHAT U WILL NEED TO DO TO FIX IT.


IF U ARE A COMPELETE IDIOT PLEASE DO NOT TRY THIS
DO NOT COME MOANING TO ME IF U FUCK UP UR PSP. I ACCEPT NO RESPONABLITY IF U DAMAGE UR PSP.

Hears what u need
No.1
Ph000 Screwdriver You can get one here http://search.ebay.ie/psp-screwdrive...fltZ9QQfromZR8

No.2
Psp replacement analog stick I Recommmend this ebay seller http://search.ebay.ie/search/search....e=search&fgtp=


STEPS

Step.1
Remove the 5 screws holding the faceplate as shown in the pictures below.


Now take the faceplate off.

P.S. Try not to strip the screws. but if u have stripped a screw and can no longer use it. u can find replacments here http://powergamingparts.com/psp-screw-kit.html.
if u need help removing a stripped screw these topics http://www.psp-hacks.com/forums/viewtopic.php?id=70774 http://www.psp-hacks.com/forums/viewtopic.php?id=69967 may have a couple of suggestions


Step.2
Now remove the screws holding the analog stick as shown in the picture below.

Now screw the new analog stick to the face plate
make sure u thighten the screws as tight as they can go.

P.S. Before u put back on the face plate make sure u did not touch the screen or get any dirt on it as u will have to remove the faceplate again to clean it.


Step.3
Now Screw the faceplate back on to the psp. make sure u tighten the screws as tight as they can.

NOW UR DONE

[papo020]

My joystick is stuck in the down position. I bought a new one; put it in (tightened everything as far as it would let me) put it back together and I still have the same problem. Is there anything else that could be wrong there? In your picture I don't see the rubber piece that you're trying to point at and I don't see one on mine. Any input? Thanks everybody!

[Alankellyeire]

Originally Posted by Fresh Bryce

around last year my analog for my phat wuz fucked up, it kept moving on its own, so i replaced it with one that did work from another psp, and nothing changed kept moving on its own

Originally Posted by papo020

My joystick is stuck in the down position. I bought a new one; put it in (tightened everything as far as it would let me) put it back together and I still have the same problem. Is there anything else that could be wrong there? In your picture I don't see the rubber piece that you're trying to point at and I don't see one on mine. Any input? Thanks everybody!

the piece of rubber is transparent so it is hard to see look again.


come back to me if you have the rubber piece and make sure its positioned correctly

[fearless1964]

Which store would u find a replacement analog stick....i have a old psp 1000 that i would like 2 repair....thx in advance

[kim_hwoarang]

Dear anyone,

I'm gonna replace/DIY my analog stick for my psp (fat) console.
Those on ebay selling slim type analog stick equivalent to those used in fat ?
Kindly enlighten me.
Thank you.

Regards
Jason