UPMSInstaller V3 for 3.80 is out

[azzazil]

Hi ppl

UPMS Project is proud to bring your the 3rd release of UPMSInstaller.

Features:
Hellcat
TheJoker
DC3 (3.71)
DC4 (3.80)

Ability to write IPL to Memory Stick under 3.80M33 and 3.90M33.
Pandora battery creation under all current firmwares and hardware apart from the new Slim V2 mobo.

Format for Fake Memory Sticks so IPL can be written. (long winded approach but it works).

You just need 1.50.PBP 3.71.PBP 3.80.PBP and UPDATE of 1.50.PBP copy them into the MS
For the UPDATE.PBP just recopy the 1.50.PBP and rename it to UPDATE.PBP

And a few more extra's. http://www.upms-project.com/modules....tit&lid=65

Download http://www.upms-project.com/modules....p=getit&lid=65

HOW TO UPMS V3 (Sapphire)
Items Required

An original Pro Duo Memory Stick that is at least 512mb for Nand Backup.
A psp running custom firmware (it is best for the psp to be running a minimum of 3.52m33 or 3.71m33-2 you may try on 3.80 m33 v5 ) with a battery at least 75% full (ideally 100% full).

1.50Eboot renamed to 150.PBP
3.71Eboot renamed to 371.PBP
3.80Eboot renamed to 380.PBP
U.P.M.S cso application.

Method

Note 1

If you already own a Pandora battery and memory stick without the multi-boot function you must remove your battery and plug in the AC cable, but the memory stick can remain inserted.

Note 2

If you are running a psp with custom firmware 3.80M33 installed you will have a slightly different install sequence.
This sequence will involve the writing of files to your Flash 0.

Note 3

The U.P.M.S installer now has an application embedded that will enable you to format a fake memory stick (you are still advised to use an original pro duo stick).

Steps

1. Switch on your psp.
2. Make sure your psp is set to run the Sony NP9660 umd iso driver if you are running 3.52cfw or above.
3. Scroll to the USB icon and connect to the computer.
4. Back up the entire contents of your memory stick to a safe folder on your computer (just to keep anything you may require later e.g. music etc).
5. Disable the psp from the computer.
6. Scroll to System Settings and press X, then scroll to Format Memory Stick and press X to format the stick.
7. After the memory stick has been formatted scroll back to the USB icon and connect to the computer.
ONLY FOLLOW THESE IF YOU ARE USING A FAKE STICK


7.1 Format your Fake with the PSP's format option first, this will clear the boot area of unsuccessful trys.
7.2 If you are using a fake memory stick copy in to the ISO folder the U.P.M.S cso file (this is just drag and drop).
7.3 Disconnect from the computer.

7.4 Scroll to the Game icon in the XMB and then scroll to the Memory Stick icon press X and then press X again to run the installer.
7.5 If running 3.80M33+ the software will detect this and write a file to Flash0 (this will enable the IPL to be written).
7.6 You should return to the XMB
7.7 Press X and X again.
7.8 Press X.
7.9 Scroll to the option that says format memory stick and format your stick by pressing X.
7.10 Remove your memory stick and reinsert while UPMS is still running, then press X.
7.11 Scroll to the USB icon and connect to the computer.

8. Copy all the downloaded and renamed eboots on to the root of your memory stick (this is just drag and drop). The root of the memory stick is the very first level that you see when connected to the computer.
9. Open up the ISO folder and copy in to it the U.P.M.S cso file (this is just drag and drop).
10. Disconnect from the computer.
11. Scroll to the Game icon in the XMB and then scroll to the Memory Stick icon press X and then press X again to run the installer.

11.1 If running 3.80M33 the software will detect this and write a file to Flash0 (this will enable the IPL to be written).
11.2 Press X and you should return to the XMB
11.3 Press X and then X again
11.4 Press X again to start the installer.


12. Run step 1 choosing to load the multi IPL (this will allow the battery to be used as normal), when done go to the next step.
If you already own a Pandora battery you can miss step2, if not run step2.
13. Run step 2 and your battery EEPROM will automatically be backed up to the memory stick if it is not already there (this will be needed to convert your battery back if needed), and then convert your battery to a Pandora.
14. After making the Pandora battery plug in the AC cable.
15. Run step 3 to install the firmware that is required to make your U.P.M.S or if you wish you can run the full installer and miss step 4 (this may take awhile but be patient as long as the memory stick light is flashing it is still working)
16. Run step 4 to install all of the application that you might require if in the previous step you choose to only load the U.P.M.S with out utilities.
17. Exit installer.



You should now have the ultimate unbricker/downgrader.

The battery and stick combination is now capable of doing all the following:


1. Upgrade a slim to 3.71-2 M33
2. Upgrade a phat to 3.71-2 M33 w/1.50-2 kernel patch
3. Upgrade a slim to 3.81-5 M33
4. Upgrade a phat to 3.81-5 M33 w/1.50 kernel patch
5. Downgrade a phat to 1.50
6. Upgrade a phat straight to 3.52 M33 from Extended Boot Menu then install update 4 via XMB with no need to downgrade to 1.50
7. Start up a psp with Ultimate Loader with support for choosing which Pandora you require V1, V3 or V4 (by holding down the L trigger)
8. Boot to the XMB with the Pandora battery inserted (Phat Only)
9. Boot to a full 1.50 firmware from the memory stick (Phat Only)
10. Use PSPFiler and other tools (if it requires 1.50 slims can't as there is no 1.5 kernel)
11. Upgraded a phat or slim to 3.71-4 M33 from the XMB with the update
12. Recover a bricked psp (phat or slim)


Here is a list of what each application can do

Despertar Cementerio 4:
Upgrade all psp phat’s and slim’s to 3.80 M33-5
Back up Nand & reinstall

Despertar Cementerio 3:
Upgrade all psp phat's and slim's to 3.71M33-2
Back up Nand & reinstall

Hellcats' Menu:
THIS MENU CAN’T LOAD ON SLIMS
Boot to 1.50 firmware from memory stick
Fix Flash 1.
Boot to original Pandora V1
Various utilities with booting to 1.5 firmware on phat psp only.
Upgrade to 3.52M33
Access USB through menu.

TheJokers Menu:
THIS MENU CAN’T LOAD ON SLIMS
Upgrade a psp phat only to 3.71M33-2 using Despertar Cementerio 3. It can only do the phat psp's due to the 1.5 firmware limitation.
Boot to original Pandora V1
Simple IPL Patch
Run Key Cleaner
Run IDstorage Manager
Run PSP Filer

Tools Menu:
Load Elf Menu
Nandmanager (used for nandbackups)

Ultimate Loader:
This is a prx that was created by gh0st that boots first when you hold the Left Trigger (Mulit-IPL) and let's you choose which menu system you want to use and launch.
It can boot all 4 systems on a phat psp but can only boot Despertar Cementerio 3/4 on a slim psp.

Extra memory sticks.
If you wish to use additional memory sticks but leave your battery set up as a Pandora one so that you can leave the one that contains the U.M.P.S files on all you have to do is

1. Connect to you AC supply.
2. Insert the memory stick you wish to use.
3. Switch on you psp.
4. Format the memory stick from with in the XMB.
5. Go to the USB icon and connect to the computer.
6. Open up the ISO folder and place in there the U.P.M.S cso file
7. Disconnect from the computer.
8. Go to the Game icon in the XMB and run the installer.
9. Run step 1 choosing to load the multi ipl, this will then allow you to use this memory stick as a normal one with your Pandora battery (you do not need to install all of the files).



Disclaimer
The U.P.M.S team are glad that you have decided to download and use our software but we are not to be held responsible for any damage that might occur while using and creating your U.P.M.S stick.

From All The U.P.M.S Team
Have fun with your stick and help to spread the word

[mattrey94]

Finally!!!!! I've been waiting for this for like ever. Nice post man.

[mrthong]

is there a tut for this? im going to upgrade my friends psp and im hoping theres a easy tut out there i get confused with dc3 and dc4 all the time.

[Demonchild]

Thanks a lot for the updates!

@mrthong - Here's my guide but its for UPMSv2. There shouldn't be any difference.

http://www.psp-hacks.com/forums/viewtopic.php?id=122613

DCv3 is Despertar Cementerio v3. DAX's unbricker that installs 3.71 M33 and it's Sony counterpart.
DCv4 is Despertar Cementerio v4. Same DAX unbricker but it installs 3.80 M33, and the counterpart.

[BCman]

im lovin it.
way more options!
wow.

tried it with my fat 3.80M33 and bricked....used my other fat 3.52M33 and works like a hot dam, musta missed something in readme with it having to access flash inorder to write IPL in higher firmwares, maybe bug, dunno.

[azzazil]

Originally Posted by bcman

im lovin it.
way more options!
wow.

tried it with my fat 3.80M33 and bricked....used my other fat 3.52M33 and works like a hot dam, musta missed something in readme with it having to access flash inorder to write IPL in higher firmwares, maybe bug, dunno.

U got brick on ur phat 3.80m33 ... o my there some thing in the reed me files saying about installing from 3.80 m33
it wrk on my slim 3.80m33 ... will test on my phat later

[BCman]

i think it was due to my custom theme and had no room left in flash for UPMS to do what its gotta do. Maybe....

[40_ounce]

Another great release from upms-project....:twothumbs:

[hackmimic]

here are some links to the offical video tutorials for UPMS and Usage vids

install video links:

how to install UPMS on a Slim http://www.upms-project.com/forums/v...php?f=39&t=733
how to insall UPMS on a Fat http://www.upms-project.com/forums/v...php?f=39&t=734

Usage video links:

how to use UPMS on a Slim http://www.upms-project.com/forums/v...php?f=39&t=731
how to use UPMS on a Fat http://www.upms-project.com/forums/v...php?f=39&t=732

[azzazil]

Tks for sharing bro