NOW WORKS WITH SLIMS TO!!!!!!! It works if you have the 1.5 kernel. WORKS WITH 3.80!
Necessary Files:
http://dl.qj.net/RemoteJoy-and-Screensh … /catid/151
http://dl.qj.net/RemoteJoy-SDL-2007-PSP … /catid/140

Instructions:
1. Open the file named remotejoy and screenshoot.

2. Copy the files usbhostfs.prx and remotejoy.prx to your seplugins folder if you dont have one then just create it at the root of your memstick if you have a GAME.TXT file in your seplugins folder open it and add the lines
ms0:/seplugins/usbhostfs.prx
ms0:/seplugins/remotejoy.prx
now save and close, if you dont have this create this also inside the seplugins folder.

3. Now open the file remotejoy sdl 2007 and copy the folder named remotejoy sdl to your desktop now open the folder you just placed on your desktop and then open the folder named psp fw 3.xxoe and copy the folder named psplink to your GAME380 folder (This stays as GAME380 for 3.90m33 firmware) or the one relevent to firmware being used e.g. GAME371, Game352 etc..

4. Ok at this point you do not enable the remotejoy.prx or the usbhostfs.prx in recovery we will do that later.

5. Now go to the game menu on your XMB and run PSPlink oe your screen should turn black with one line of text and pc should now say new device recognised PSP TYPE B in the install drivers window choose to install drivers maually then install from specific location and point your pc to RemoteJoySDL/libUSB and then either driver or driver x64(if you have a 64bit operating system) and click ok and it should now install the usb driver for the psp.

6.Now shut down psp completely and boot into recovery (Holding right shoulder button in while switching on psp), go to plugins and enable remotejoy.prx and usbhostfs.prx click back and then exit.

7. Once your psp has booted start a game either UMD or ISO and open the RemoteJoySDL folder you placed on your desktop and
Double click on Start-USBHostFS_PC.bat
Then Double click on one of the following.
Start-RemoteJoy.bat - for a window
Start-RemoteJoy-FPS.bat - for a window with FPS display
Start-RemoteJoy-FS.bat - for fullscreen
Start-RemoteJoy-FS-FPS.bat - for fullscreen with FPS display
Then insert your usb cable once inserted you dont need to keep taking it out to change games however when you exit a game your XMB will not show in the window but when you start another game that game will show automatically.

Your psp screen should now appear in the window opened when you clicked on one of the four commands above.

Now just enjoy your psp on the big screen.

2 known glitches...

1. If your game auto loads your save at the beginning it may crash (to overcome this let the game load your save file before you connect to pc.

2. It can also hang when you try to save you can work around in the same way as above but it doesn't do it on all games.

IN ORDER TO PLAY ONLINE!!!!!!!!!!

you will need to remove the USB cable at this point.

If you are going online with this then you will first need to connect to the internet, go online, then get to the main lobby of the online game you are playing.

Once you are in the online lobby plug up your USB cable.

NOTE: If you do not see your updated screen click or press F3.

EDIT: Please move to Tutorials.
EDIT 2: Works with 3.80 m33...also works with slims

Last edited by inimitablesikh (2008-03-16 10:59:59)