Dedicated Noob-assistant, Chaos Zero, has kindly packaged DevHook 0.50 into user friendly installers for all those folks having difficulties, and judging by the number of comments I’ve sifted through on the original DevHook v0.50 article, there are quite a few requiring help. Never fear! This will [hopefully] solve all your issues!
DevHook Ultimate Installer v1.5.1:
[ PSP Hacks ]
[ mirror 1 (courtesy of Chaos Zero) ]
[ mirror 2 (torrent) ]
- Install DevHook 0.50 with 2.82
- Install PSPConv by ZiNgABuRgA
- Install PSP ISO Compressor v1.4
- Install PSP Content Manager v1.5
- Full Install: DevHook 0.50, PSP ISO Compressor, Content Manager
DevHook Ultimate Installer 1.5.1 Advanced:
[ PSP Hacks ]
[ mirror 1 (courtesy of Chaos Zero) ]
[ mirror 2 (torrent) ]
- Install DevHook 0.50 with 2.82
- Install PSPConv by ZiNgABuRgA
- Install PSP ISO Compressor v1.4
- Install PSP Content Manager v1.5
- Full Install: DevHook 0.50, PSP ISO Compressor, Content Manager
- Advanced: Install 2.71 SE-C and DevHook 0.50
Instructions:
- Run the Ultimate Installer v1.5 to put all files on your memory stick.
- On your PSP, go to your GAME menu. Select PSAR Dumper.
- When the PSAR Dumper loads, press X.
- There will be lines of text on your PSP. The 2.82 firmware is now being put on your PSP’s memory stick.
- When the dumper is complete, turn off your PSP, not just standby, but right off.
- Turn your PSP on and activate the USB Connection.
- On your memory card root, you will see a newly created F0 folder.
- Run the file “DevHook Setup.bat”
- After a second, disconnect the USB and go to your GAME menu. Launch DevHook 0.50.
- Go to the “FLASH ROM” menu.
- If you flashed the DevHook files from DevHook 0.46, remove those first.
- Choose “flash1: < ms0: install configfile". Press circle.
- Choose firmware 2.82 in the “FIRMWARE” menu and press “START”
- When you enter DevHook, A blue screen will appear saying your setting are corrupt. Press O to solve this.
Of course you can always resort to our forums for further assistance, here or, here.
Share and Enjoy:
These icons link to social bookmarking sites where readers can share and discover new web pages.
thanks for this but i keep getting an error when i open psardumper my psp turns off iv run the installer twice and it still does it
im running 2.71 SE-C
Ahhhh man i just downloaded version 3.51 i shouldnt have……
oeh, big panic i have to say over devhook.
hoping that 3.01 is not so far so im gonna wait lil and watch what happens.
i dont have games that require 2.82 so at this moment i dont need it. :P
but goot to know that new devhook is out there.
I have posted instruction in the comment of psp-haxors.com on how to do this without flashing your psp
ppl can’t find your instructions. Though i believe you don’t even need to do steps 10-12 to get it running…
nice very nice i wounder what is going to be next? psp/cellphone psp/something? man i love hackers who hacks sony
well time to move on i think there is nothing more they can do to the psp … thanks chaos zero… like always YOUR THE MAN … when others left the scene*cough DARK ALEX* you stay and fight the good fight
if you were a chick i would let you have sex with me :P
too creepy .. ?? ok nevermind :P
thanks for this but i keep getting an error when i open psardumper my psp turns off iv run the installer twice and it still does it
HOW CAN I SOLVE THIS???????????
PLEASE HELP ME//////
is this intended for TA-082 mobos?
no
People getting error message: If you are running 2.71 - C than you should put the dumper folders into GAME150… That worked for me…
ANYONE CAN HELP ME????? I HAVE A 2.82 PSP, AND WHEN I RUN PSAR DUMPER, IT FREEZE AT THE BOOTSCREEN AND THEN SHUT OFF….
HELP ME!!!!
bood
LOL @ no9
I reckon thats that one fucked !!
Tit!
anyone who can provide some help with getting this to work on a TA-082 mobo - would be greatly appreciated
Come on psp-hacks….. v 1.5.1 is out now, fixes bug fixes etc
Guys don’t download this BETA yet. Trust Me!! It took me a Long Ass Time To make this work and what i got is a 2.82 firmware, that seem like 2.71 and below. And the bad thing is after everything is set up, and you configurate everything, all the configuration u did is going to be a real Drag and Waste of your time. Also the RSS is will crash and boot u right back to 1.5, believe me. So just stay with your Original Devhook hook for now, and using that Flash is a risk of a Brick. O_O”
p.s, U don’t have listen to what just said, but im just trying to save your time until BOOSTER releases a better DEVHOOK 2.8x emulator.
@5 - u lose 2 members of your family, some jerk use ur name to F**k up with people’s psp, the mofo $ony wants to see u under 6 feet in the ground, noobs blame u when they acess DA.com ( even when that’s no your site ) and finaly, jerks blame u when u get stressed by these things………….
what do u goin to do ?? smile and make stuff like not happens ??? NO JERK.
he has my TOTAL compreension if he wants to stop, i will be VERY sad if this happens, but still, it’s HIS life thats been destroyed by THE MOFO $ONY and the mofo site ( da.com ), not yours.
i followed all instructions in the readme , all went right and ok but when i choose firmware 2.82 then start devhook it is emulated ok and the emulated firmware gives the blue screen error when i press circle 2.82 reboots and give the same blue screen error , i pressed
circle again and again but the error keeps popping up i don’t know what to do i can’t get to 2.82 XMB :(
I have the same prob as #14 :(
iv followed the instructions and all is fine but I am having probs running pro evo soccer 6 in iso emulation just want to see if anyone else is having this problem.
Thanks
i get the same problem!
im running 2.71sec.
any ideas?
14. you need to copy your flash1 folder from 2.71 rename it to f1 and copy it to 282 folder on your mem sick
my PSP shuts down and will not boot up DevHook w/o getting the blue screen and no matter how many times i press circle, it restarts and does it again…i can get back to my Firmware 1.5, but when i load DevHook again, it still does the blue screen
Same Problem as #14, 15…
I MANAGED TO RUN it
create a folder in dh/282/.. called f1
create a folder in dh called 28X
but there is still a prob … the settings are not saved !!!
but it is emulated ok …. enjoy !! :(
Can someone please help me with this? I’ve installed the auto installer, and when I go to boot up devhook my screen turns blank. The EBOOT boots up, but when I select start, nothing happens. I also select to emulate 2.82 firmware. Can someone please help?
can anyone confirm that they’ve run this on a TA-082 mono using HEN?
#24: I tried. I haven’t found out how to yet.
does this support usb so I can play isos off my computer?
is it working fine with 2.71 se-c???
taco - yeah, I saw your post on the forum. I wonder if this was the package that was referred to. I just want some sort of confirmation as to whether this devhook can be made to work on a ta-082
Why doesnt anyone answer the TA-082 questions? I have a TA-082 and i want this to work, cuz i own!
this is cool and all but it doesnt exactly make the instilation much easier why cant we just have a installer package that does it all like we did with devhook 0.46
anyone who’s gotten this to work, have they tried the wifi connectivity? I finally got 2.82 to work, (tacking my f1 folder from dh/271) thereby bypassing the “reset system settings” screen… (which endlessly looped, like 14.) but now there’s no connectivity. The network setup works fine, but the browser and, (for the game I tested) Exit’s online downloader doesn’t work… They hang hard. Any ideas? I assume it’s not liking my f1 folder but if the system setting reset won’t work, (even one you’re on the XMB; I had to erese the f1 folder it created and drop my 271 back in) where can we get the correct 2.82 files?
I’ve seen some Devhook hybrid 3.01FW package flooting around usenet, any one know if its real or bricker?
Sorry to say but this doesnot work on a TA-082!! I am sad because i own a TA-082. Maybe one will be made for people using HEN.
But Sexman - are you saying that because you can’t get it to work, or you’ve gotten reliable information for the developers (or someone who really knows)?
Well i did it all word by word and never got the blue screen that said corrupt…. I got a weird screen that looked similar to devhook but in my xmb this didn’t come with a revert back to 1.5 firmware. kinda distraught on that i liked it. But gonna try out a game to see if it works. for me
is it because i’m a nigga with no otha??? who u callin bitch no 30???
Alright, I’m just having too many problems with this and I don’t really need it. What all do I have to do to return to DH 0.46?
#30….i got he internet and everything to work fine when im emulating 2.82….i dont know why urs isnt…
CAN SOMEONE PLEASE TELL ME IF IT WORKS WITH 2.8+
#34 i got the same thing…. weird
I didnt get the corrupt screen, but it stands 2.82 in systeminformation. Have i done it right???
Is this even worth giving it a shot???
wtf is wrong with all of you it is a beta do you know what a beta is it means it has bugs
damm back up your psp before u install it and if u wanna go back to 46 just do it i went back 3 times last night
thank you chaoszero i was waitng for this
So, delete the DH files and re-run the 0.46 installer?
i uninstalled the flash with devhook and put all my files back
to return to devhook 46
ok uninstall flash1 and flash 0 with devhook hit any button psp reboots reformat mem stick then take your back up dh and psp file and copy them to psp
I think this download is incomplete. I obtained another one at psp-haxors.com and i didnt even flash the psp and it worked. The site also has two versions. Both for 2.71 SE and 1.5 users. I can finally play Socom. Props to the chaos and others
I´m running on 2.71C, everithing goes right with this installer but Pro Evo 6 does not work…after you choose a language and apears konami and other stuff PSP still in black screen…
your all noobs it works fine for me
Thanks, it worked perfectly! SOCOM 2 online plays great.
Hi guys, i have a 2.80 psp
Does devhook 0.50 work on it??
People say that devhook 0.50 ist a hight risk of brick, ist it right??
I dont wanna brick my psp =( plzz helpp!!
Damn!! My PSP boots up into 2.82, but I’m stuck. The buttons don’t respond. It is not on hold either, I think it may have something to do with my stuck down HOME button. I will have to try this tomorrow with my Other PSP, do you guys have any suggestions?
socom 2 did u download the patch ???
ye im sticking to my 0.45 no problemz with it bootz all games :D
i have a 1.5 psp and have no desire at the present time to go to a hacked version of 2.71. how do i install this devhook on a 1.5 psp?
after finnaly getting this bitch to work I was very dissapointed it crashes it has errors and doesnt load the iso’s every time So I would hold out for awhile
damn, if its beta then why is it releast in pub, i mean everyone are trying to get it working.
there should be extra note or smth that it is a beta, and not fully working, so newbs and noobs wont screw up their psp’s.
and ppl. do u really need it???
cant u just wait lil longer when some stabel ver comes out?
u have played all the other games that dont req 2.8+ fw?
it is released so i can play socom 2 thanks booster
hi i was trying to install this but it didn’t install dh…… do i need to have one installed previously? i got all the way to the part when it says reboot and load devhook 0.5 but it didnt write devhook o.5 i only was left with the firmware dumping prog… before installed i formatted my ms do i need to put devhook on before?
Thank You booster its here i’ve been waiting for this great
hi i was trying to install this but it didn’t install dh…… do i need to have one installed previously? i got all the way to the part when it says reboot and load devhook 0.5 but it didnt write devhook o.5 i only was left with the firmware dumping prog… before installed i formatted my ms do i need to put devhook on before? ..
its not really a ” ultimate” installer cause u still need 2 manualy do stuff to make it work -_-
IF UR HAVING TROUBLE WITH IT NOT INCLUDING THE ACTUAL DEVHOOK EBOOT APP. THEN INSTALL THE FULL SE-C AND DEVHOOK OPTION TO A FOLDER ON UR HARD DRIVE, THE DEVHOOJ FILES ARE INCLUDED IN THIS OPTION, MUST BE AN ERROR WITH THE INSTALL SETUP.THEN JUST COPY OVER THE PSP\GAME150\DEVHOOK… FOLDERS TO UR PSP
no it is the ultimate installer if you cant follow simple directions maybe u should upgrade to 3.01 or wait till someone makes an idoit proof (59) installer
#3 “flip”….how can you install DevHook 0.50 without Flahsing your PSP…you said you gave instructions on psp-haxors.com…but I’ve looked under the comments for DevHook easy installer and you do not give instructions on how to use this DevHook without Flahsing
any one give me a working 282 in .zip or .rar
and i will give a free full version of
psp movie creator it it change any movie to psp
here adamcaron3.14@hotmail.com for msn
Run the Ultimate Installer v1.5 to put all files on your memory stick.
On your PSP, go to your GAME menu. Select PSAR Dumper.
When the PSAR Dumper loads, press X.
There will be lines of text on your PSP. The 2.82 firmware is now being put on your PSP’s memory stick.
When the dumper is complete, turn off your PSP, not just standby, but right off.
Turn your PSP on and activate the USB Connection.
On your memory card root, you will see a newly created F0 folder.
Run the file “DevHook Setup.bat”
After a second, disconnect the USB and go to your GAME menu. Launch DevHook 0.50.
Go to the “FLASH ROM” menu.
If you flashed the DevHook files from DevHook 0.46, remove those first.
Choose “flash1:
thats REAL simple there…i can only hope these are just the instructions for the advanced version
damn people seem to be having lots of problems with this thing…guess im going to hold out…i dont wanna mess up my psp i like it the way it is with my se-b’…..its all working fine for me…..but good work guyz another great app. ….
-PS: Dark Alex….DONT LEAVE US!!!!!! but if u do…we( I ) understand!!
KiCK AsS!!!…Now i can go online with Fireteam Bravo 2!!!
Really easy to follow instructions
Thank You
works perfectly i now i have 2.82 very simple i don’t know why so many people are having trouble thanks so much booster great now i can play all kinds of 2.8 games amazing app
ONLINE STILL DOESNT WORK : (
To mike, thx alot, got 0.46 back. I figured that’s all I would have to do, but I wanted to make sure. I’m sure that if I tried it again, it would work fine, but the thing is I don’t really need it yet, as I don’t have any UMD’s requiring FW higher than 2.71, and I don’t use ISO’s yet, and nothing but 1.5 was working as it was. So, if I get a 2.8x UMD, I can always try it again then. If not, I can just wait until Booster finishes the full version and install it then. Good stuff, though, thx alot to everyone who helped make this possible!
I had problems with this but formated stick and run steps 1-9 then 13 on (skipped the flash section) and works AOK.
i was looking forward to having an emulated 2.82 fw on my 1.5,but i tryed for a bit to install devhook 50 and cant get it to work, idont know if im missing any vital files (i.e. 2.82 fw eboot ) or i keep messing up the instilation but i thought that every thing i needed was in the instilation pack.iv read a lot of comments and my problem keeps coming up ,at the end of the instilation when the blue error message appears i press o and it just keeps looping round . so i think i will wait now untill something simpler comes allong………. psp rules ………..
***Whats the deal with the fireteam bravo 2 update does that update you to to ver 3.01 or is it just a patch for the game??
I got the 2.82 firmware to run alright, but I’m now running into the firmware freezing whenever I change the clock speed to anything but default. Anyone know a fix to this?
I load everything and i get the blue screen taht says to press O. Ther is also another menu for devhook so i press O and it just turns off and reboots back to the blue screen. anyhelp
I’m still dealing with the lack of online… Trying to think outside the box: do you guys who have the online working have the previous firmware files? (the 271 folder with all its goodies from devhook .46) I’m loading DH .50 on a “virgin” card, (at least that she says…;p) I’ve done it a few times now, using the Ultimate loader 1.5.1, and I’m still hard crashing in the browser. What bugs me is we’re all doing the same thing basically… why are there such varied results?
And as it stands, let me say thank you to Booster, Chaos Zero, and everyone here for being supportive… Even with this last issue I’ve got, it still looks like Metal Gear: PO is on!
am i the only one who didnt get the blue screen? i’m running se-c and everything’s fine. did exactly as what the readme said just had to transfer the files from GAME to GAME150.
i’m using 1.50 and it freezes on me…nice try though. hope for an update
#30: I got same your phenomenon. didn’t use internet browser but still access to internet to enable *.wma and flash player. Who can help us to solve this problem??? many thanks.
i can get to the XMB and see that i’m on 2.82, but freezes when i try to play a game. bleh.
IF YOU GUYS ARE HAVING PROBLEMS BOOT UP THE ULTIMATE INSTALLER IM 1.5 FIRMWARE! NOT 2.81SE-C
IF YOU GUYS ARE HAVING PROBLEMS BOOT UP THE ULTIMATE INSTALLER IN 1.5 FIRMWARE! NOT 2.81SE-C
i can’t make it working
it was alot easyer with the old devhook
this one not work
read comment 66.
I didnt get the corrupt screen, but it stands 2.82 in systeminformation. Have i done it right??
Sounds too dangerous for me. Ill wait for the “real” easy installer pak
any support for mac?
Guys http://www.psp-haxors.com
has the updated 1.5.1 installer with these problems fixed ??
im downloading now
Booster and Chaos Zero - You guys rock! Thank you for not selling out. So, when are you gonna get started on the PS3? This fuqer looks like one big azz gorilla of a PSP. I’ve got mine and I’m gonna wait until Dec 25th before I update it so that the Gods of Code have more time to gift me with a hacked update. Make it happen if you can. PS3 DeviceHook with a 750 GB External USB HD? Makes ya wanna nut. Bring it.
i mentioned this in the other release.. ftb2 online is very slow and got a connection error ..also anyone got 2.81+ only games working?
the sahara game crashes for me
i cant fix that blue error! im pressing “O” and nothing - ????
I got it working eventually on mine but seems to be quite buggy as i got multiple lock ups and iso’s dont always work.
Also the main issue i have with it is after you have run though the initial set up (Time, Date, PSP name etc) it does not save the configuration and it has to be entered everytime. I have gone back to devhook packaged with 2.71SE with uses the 2.71 Flash files and saves room on the mem stick for now.
Im sure that Booster will fix all the bugs hence this being a BETA version and im sure he released it into the wild to get a good idea of what needs to be fixed so when the proper release comes out it will be as solid as a rock!
Respekt to Booster, Dark Alex and all the coders that make this stuff happen and ignore all the Noobs posting stupid comments all the time :D
@ #93 & Everyone having issues with the corrupt files and having to press O and then being stuck in a loop.
Just make sure the following folders are created on ya memstick:
dh\282