cool

looks and sounds cool, but i got a 1.50 and want it to stay that way, unless the final one rocks harder. ( off topic i emulate 2.71 with devhook but my wifi does not work, is there a fix)?

lol i love u chaos this works hecka good all we need is a noob freind xflasher for the font to change =)

sooo….if installed SEB with devhook 2.71, can i play the old ISO’s without UMD? because i have a busted UMD drive. please answer me before i install. ty.

TA082? i checked behind my UMD door, and there’s no letters on the board? does that mean it’s not a TA082?

@Post 5. Pretty much, as long as there are definately no numbers where the image shown everywhere shows. If you look closely, you’ll see a an upside down number, half covered on the left side though. That’s not the TA number, so don’t worry about that (only mentioning this, because I had to have this confirmed myself).

@Post 4. Unfortunately, no. I think DA’s planning to get it into 2.71 SE-C. But it’s not in yet. Just keep waiting and keeping your fingers crossed (but man, that must be the most practical reason for using .iso’s/umd emulation ever).

tried installing using the installer, and it freezes up everytime it gets to 63-64% where it installing the “your iso and cso goes here”……. what’s happenning?

does this flash your psp to 2.71 ive got 1.50 whats the best

@8- Just wait. At that point it is copying the biggest file to the card, when all the files before it were small.

I like my stay with 2.71 SE-B it gives me all the homebrew goodness of 1.50 and the ability to run 2.71 UMD’s and ISO’s im loving to beable to downgrade to 1.50 and back to 2.71 with it with no risk and im loving the recovery just today i flashed something and bricked my psp and the recovery saved meh life thank god ^^!

oops wrong post meant to post in the 2.82 news thing :P

can you use this without flashing

Hi all…Just wondering to myself….is ther any need for device hook to be put onto my PSP v2.71 SE-B?

I dont see the piont in putting it on when all games will now run directly from GAME>MEMORY STICK, without the need for devhook.

anyone fill me in on this…?

P.S. Devhook NANDflash didnt let me play Killzone…but the normal GAME> MEMORY STICK 2.71 SE-B runs it no problems showing me ther is no use for devhook atm…until 2.80+ emulation ofc. :D

WTF!!! I don’t understand wtf is this? And it is better to have 1.5 than this ? Lol?

Anonny-x-mas, it’s because you don’t kow what it is, and you don’t understand. This custom firmware is way better than 1.50. If you can’t understand CZ’s pack, then go with my pack:

http://www.black-chronos.net/PSP/271SE_B-UNFP.zip
(UNFP stands for Ultra Noob-Friendly Package ^_^)

made a typo, lol. kow/ know* =P

So,is this a stupid question?
Will i still need Devhook? I have tested it with 2 games… just put the isos into the ISO folder and the game icons appeared on the Game icon of PSP…

Will i still need Devhook?

no you don’t, but it still serve some purpose, but.. basically, its useless. =P

yeah, im also waiting for the no-umd needed option. Ill be keeping watch too.

Am I still correct in thinking that only 99% of 1.50 homebrew works on SE-B?

Actually it’s 99.9%. Only a small portion with SFO (that can be fixed) doesn’t work. Almost all others should work, so yeah.. For me, I treat it as 100% compatiblity. =P

Can Anyone Tell Me If I Uses This 2.71SE_B
Can It Be Downgraded To 1.50 With The Normal 1.50 Downgrader?! CAn Someone Help..
Thanks!

You can use its built in recovery feature to downgrade back to 1.50

It says under my system info that it is firmware 2.71 SE.. how do i go back to 1.5??

How do i use the recovery feature ? anyone help PLEASEE!

this works great….when will the NO UMD be released…. i too have a bad drive. please please make it sooooonnnnnnnn.

Does it detects UMD video iso in iso folder? or need to run UMD emulator under GAME 1.5?

it’s off topic, is there a way to run UMD “video” game that requires higher firmware version later than 1.5? (i mean game that appear in XMB video menu)

So this only works on a PSP that has 1.5 on it already?

Whats the easist way for a 2.6 FW PSP? is there no easy installer for 2.6?

thanks and sorry for n00b question!

Ok..You Mean..If Im Using The 2.71SE-B..There Is A Recovery Feature To Return My Firmware To 1.50..And That Means I Have A Originally 1.50?!
Im New In This PSP Thing..Im Just Curious..Thanks Everyone For The Info..

ahh im getting tired of seeing all these 2.71 updates why cant you make more stuff like that for a 1.5 psp? but anyways good job :P

Yuriy, its because most of the 1.5 stuff already works in this version of SE-B. You’ll see later on some stuff for 1.5 or 2.71 SE-X (lol), but for these past 2 weeks, its just the hype of custom FW, since everybody has been dreaming, ranting about. Compared from last year of the same time, this is worth the wait, as the evolving psp development continues. I myself is still waiting on an update on Ruckus the PSP 1.5 prog for Deejay’s, but seems no one is working on it.

Just one thing holding me back at this point.

Does anyone know if Edison Carter’s cheat device works with this?

I have 1.5 now and both 2.6 and 2.71 devhooked on my 2GB stick for this reason.

DOES THE DECRYPTER TEST WORK IN 2.71 TA82?

kind of a stupid question. do i need to upgrade to 2.71 first for it to install? because im runnin a 2.0 and when i try to install it, the screen goes black and then the system shuts off.

So how do I downgrade to 1.5 from 2.71 SE-B? I hope there’s a safe way to go back. I can’t get any 1.5 homebrew to even come up in the memory stick and the PSP locks up with the memory card light on. What directories should there be and where shoud I put the homebrew? 2.71-A worked perfect and I upgraded to 2.71-B.

#34 just tried cheat device and it said corrup save file. So I’m guessing no. That sucks I was hopeing it would work.

36. No you do not have to upgrade, but you may have to downgrade to 1.5.

37. There is a recovery mode built in that will downgrade back to 1.5.

Both you guys do yourself a favor a download ChaosZero’s installer. It will make everything much easier for you.

Does anyone know about Edison Carter’s cheat device? If is doesnt work with 2.71 SE, can I boot 2.6 w/ devhook from 2.71 SE for it to work?

Thanks #38. Mayhaps devhook emulating 2.6 would work. If you try it could you please let me know?

Thanks in advance.

@36 - No, you need to be at 1.5, then run the installer.

@37 - If you have a recovery folder set up with the 1.5 fw in it, you should be able to hold R for recovery mode during boot-up and you should be able to downgrade once more. As for the freezing/slowness, the remedy for it is in the original post. Follow that and you’re set

Sorry, I’m still at work here and it got busy. Just follow the first post and you’ll be fine.

DOES ANYONE KNOW WHY WIFI ISNT WORKING?????

goodo job now if o nly ta82 users can get soem thing like this ill be happy

#40 I tried but can’t get Devhook to load my UMD with 2.6 loaded. I could be me, I have never used Devhook before so I my be doing something wrong. Everytime I try to load the UMD with 2.6 it turns my PSP off sorry maybe someone else will try. Sorry

or if soem 1 could finda way to dev hook it

@23&25: first you turn off your PSP, then turn it back on with your R trigger pressed down, then you’ll enter the recovery menu, after that, choose the option for you to return back to 1.5 and make sure you have a 1.50 UPDATE.PBP inside PSP/GAME/RECOVERY folder. ^_^

@30: see if you have a ta-082, if you don’t upgrade to 2.71 and downgrade to 1.50, after which you can install this with ease.

@36: the SE can only be installed on a 1.5 PSP, so upgrade your 2.6 to 2.71, downgrade to 2.71 with the update flasher, then you can install this with ease.

To everyone, go get my pack because it has a freaking detailed readme plus it’s in zip archive that works for all OS systems:
http://www.black-chronos.net/PSP/271SE_B-UNFP.zip

if i have 2.82 do i still need this someone write me i need to know mikey8122003@yahoo.com

NOUMD support…….pleassssssssssssssssseeeeeeeeeeeeeeee

@48: no if you have 2.82, you can bang your head and die. lol.. this only works on 1.5

how can i set it up to always go ‘home’ on startup, even if there’s a disk in the drive?

Just a question for ya. I have fw 2.5, was 1.5 originally. My PSP wont read disc’s tho anymore. I dont know if my laser went out or my motor doesn’t spin fast enough anymore, but could i still put this on or does it require use too gta - exploit, or a different version.

I’m currently using 1.5 custom fw. Is it ok to direct flash this on?

I still don’t see a BIG advantage or difference between this and having my 1.5 for all homebrew and devhook with 2.71 firmware. With 1.5 i’m guaranteed that all my homebrew and cheat devices , emulators…..everything without having to do anything ,I meen the only “pain” if you can even call it that is to start devhook when i want to play a ISO or UMD… really no big deal at all, and then i know that all my emulators will work perfectly. The only way i think I would consider this I think is if and when they come out with a “no UMD required version” maybe then. The drive on my psp works fine but I understand they tend to brake……….Peace.

just to let you guys know that a few games wont work on the 2.71 se - b like fifa 07, untold legend 2 but if you use the dev hook that comes with it and flash it they work fine : )

hi,how can i play 2.71 requiring games on my 1.5 emulating psp? or how do i stop emulating 1.5 using henc devhook on 2.71?
thnx

post 55:
weird. my fifa 07 works without using devhook in 2.71 se-b. but i dun own untold legen 2. so this game not known to me yet.

post 55 again:
do u mean untold legend 2 is the “untold legend - the warriors code? if so then u might be wrong coz mine is working without the help of devhook.

Do u have to have 2.71 A or can u just have 1.5, and then upgrade to 2.71B. please just give me a straight foward answer.

Everything works great after flashing - however, another game that doesn’t work which worked under devhook is go suduko.

any idea when NO UMD will be supported???

just wait for Version C, thats’s what im doing. I have a 1.5, well, 2 of them, both for deejaying, using Ruckus. But I’ll wait for Version C so my GTA umd wont be further circular scratched. For NO UMD support, just wait for Version C. Just wait, if D_A got this far to load ISOs without devhook, im sure they’ll get to the NO UMD part.

@59. You can have any method, just read slowly on the different varaiety of packages offered by Chaos Zero, so it can click to your head that any style is offered. Just not for any FW above 2.71. Basically, there is a Fresh install (like windows xp booting from CD) then there’s the other to upgrade (like windows xp CD booting inside Windows 2000 or 98 from desktop) sort of a ok example. But the best recommended is having 1.5 first (for a fresh install).

@51: run recovery mode by holding R trig down while starting up ur PSP, then enable the Skip SCE logo, then you’ll go to home even if there’s a UMD in the drive.

@52: you can put this on, just upgrade to 2.71, downgrade with update flasher, then you’ll get a 1.5 which you can use my pack to run the SE-B upgrade.

@53: it is recommended that you have a clean 1.5 with the maximum space u can have on flash0, so, just upgrade to 2.71, downgrade with update flasher (it will format the flash0 while downgrading to ensure u have a clean 1.5) and you can install SE-B with my pack with ease. ^_^

Again, for those who needs a link to my pack, which includes a complete guide/readme typed personally by myself (with the aid of the original readme that came with SE) for 1 hour+, you can download it here:
http://www.black-chronos.net/PSP/271SE_B-UNFP.zip

@59: if you have a 1.50, go ahead with the installation of the SE-B, you don’t need SE-A to be installed first. But, if you already have SE-A installed, then just get the upgrade pack from SE-A t SE-B. ^_^

can i run devhook evolved on 2.71 se-b

Installed it..loved it…but had to revert back to firmware 1.5 cos my psp refused to load legend of heroes 1 which I’m playing right now.will wait till bugs sorted out before my next SE firmware update…but still..GREAT WORK TO DARK ALEX,BOOSTER,HARLEYG,CHAOS ZERO..AND ALL WHO ARE CONTRIBUTING TO THE HOMEBREW SCENE ON PSP….THANKS.

Is it just me or does anyone get the message when running RECOVERY, BATTERY MUST BE 75% FULL even with the AC Adaptor plugged in?…What if i get a brick… its of no fuckin use to me if i cant even exe it with a full battery and ac plugged in….

Hey guys,

I got everything set up and running, including isos and 1.5 homebrew. But I can’t seem to get the corrupt icons to disappear, even by running recovery mode. Can someone give me some tips?

Another question: The Revovery folder in the Game directory shows up as a corrupt icon. I ended up moving it out of that directory so I don’t have to see it. I’m assuming I’d have to move it back if I ever wanted to go into recovery mode to revert to 1.50… but there must be a way to hide the corrupt icon instead? And yes, I do have ‘Hide Corrupted Icons’ enabled. :)

thanx guys

does any know how to get this to run Marvel Ultimate Alliance

this is not working…and what file am i supposed to install it in?!?!